Skip to main content

Curtain walls can be defined as non-structural aluminum-framed walls, containing infills of glass, thin stone, or metal panels that are connected back to the building structure. There are two main categories of curtain walls: unitized curtain walls and stick-built systems. So how do you know which one is right for your building? 



Unitized Curtain Systems

Unitized curtain systems are composed of large glass units that are created and glazed within a factory and then sent to the construction site. Once on site, the units can then be hoisted onto anchors connected to the building. High quality, due to tight tolerances of fabrication in a climate-controlled environment, is only one hallmark of this type of system. Since there is no on-site glazing, another major benefit of using a unitized system is the speed of installation.

The system can be installed in a third of the time of a stick-built system. This system is well suited for cases where there is a large volume of prefabricated unitized panels required, where there are higher field labor costs (thereby shifting the labor to a more cost-effective factory work force), where higher performance is needed (for wind loads, air/moisture protection, seismic/blast performance), for taller structures, and more regular conditions for panel optimization.



Stick Built Glass System

If your project doesn’t suit most of the criteria for a unitized system, your other option is to use a stick-built system. The vast majority of low to mid-rise curtain walls are installed in this way. Long pieces of aluminum (hence the name stick) are inserted between floors vertically and horizontally between vertical members to support and transfer the load of the glass back to structure.


Most of the erection and glazing for a stick-built system is done on site. One of the benefits of stick-built systems is its economic friendliness for facades that have lower required volumes and many complicated conditions. The lead times for these types of systems are often much shorter for fabricated materials to be delivered to the site and allow for less up front staging. This is shorter in comparison to a unitized system, where six months to a year can be required for this process. However, the trade-off is that the installation takes longer to complete on-site. You also need a significant amount of space for installation and storage of material on the site, which can be difficult in many high-traffic cities with tight job sites.


Do you have questions regarding which type of system to use? Contact us today to speak with a professional!


W&W Glass LLC is a family owned business with a 70-year history in the metal and glass industry, one of the largest metal and structural glass companies in the New York metropolitan area and the largest supplier of structural glass systems in the country. We have over two decades of experience in the design and installation of various building enclosure systems including, stick-built curtain walls, pre-glazed unitized curtain walls, Pilkington Planar structural glass facades and custom metal and glass enclosure systems. We install all of our work with our own dedicated union labor force. W&W consistently is the largest employer of glaziers in the NY metropolitan area.


  • Shadman Afridi says:

    I went through the detailed description of structural glazing. It was just fantastic explanation about glass system. I’m a master student and I need some information for my presentation about “structural glazing”. I’d be very grateful if you answer to some of the questions below. Thank you
    Shadman, M.Sc Construction Project Management (Birmingham city university).
    Q1. What are your perspective about structural glazing?
    Q2. What issues you’ve faced in installation of this system?
    Q3. How you tackled with these problems?

  • yara says:

    hello I need to know which system is more economic stick or unitized thank you

  • Hello Yara,

    Thanks for your inquiry. When choosing between stick and unitized construction it would depend on project size, locations, repetition, labor rates, site layout space, etc. On the average, smaller projects tend to make more sense for stick curtain wall since the lead times are shorter and there are less expensive prefabbed pieces. For larger projects in major cities, unitized is now more or less the standard.

  • ibdaa says:

    stick is more economic

Leave a Reply